| 著者名 (*は学外研究者) | 学術論文名 | 発表誌名, 巻(号), 始頁-終頁 (年) | 論文分類 |
| 蔦原道久, 四方憲治, 片岡武, 田村明紀 | 差分格子ボルツマン法によるエッジトーンの直接計算 | 計算数理工学論文集Vol.4, 37-42(2004) | A |
| Takeshi Kataoka, Michihisa Tsutahara, Kazuhiko Ogawa, Yoshifumi Yamamoto, Masakazu Shoji and Yoshihide Sakai | Knudsen pump and its possibility of application to satellite control | Theoretical and applied mechanics Japan, 53, 155-161(2004) | A |
| Minoru Watari and Michihisa Tsutahara | Possibility of constructing a multispeed Bhatnagar-Gross- Krook thermal model of the lattice Boltzmann method | Physical Review E, 70, 016703-1-9(2004) | A |
| Michihisa Tsutahara, Takeshi Kataoka and Kenji Shikata | Direct simulations of aerodynamic sound by the finite difference Lattice Boltzmann Method | Computational Mechanics, WCCM VI in conjunction with APCOM’04, Beijing, China, 1-11(2004) | B |
| Takeshi Kataoka and Michihisa Tsutahara | Lattice Boltzmann method for the compressible Euler Equations | Physical Review E, 69, 056702-1-14(2004) | A |
| Takeshi Kataoka and Michihisa Tsutahara | Instability
of solitary wave solutions to long-wavelength transverse perturbations
in the generalized Kadmtsev-Petviashvili equation with negative
dispersion | Physical Review E, 70, 016604-1-9(2004) | A |
| 片岡武, 蔦原道久, 後藤隆宏 | 回転二重同心円筒内流体の吸込みわき出し流れ | 日本機械学会論文集(B編), 70(699), 2681-2688(2004) | A |
| Akinori Tamura and Michihisa Tsutahara | Direct simulation of sound wave emitted from a rotating body by the finite difference lattice Boltzmann model with ALE method | The 6th KSME-JSME Thermal and Fluids Engineering Conference, CD-ROM (2004) | B |
| Hokeun Kang*, Michihisa Tsutahara, Kenji Shikata, Yutaek Kim* and Youngho Lee* | Application of the Finite Difference Lattice Boltzmann Method with Internal Degree of Freedom to Flow-Induced Noise | The 6th KSME-JSME Thermal and Fluids Engineering Conference, CD-ROM (2004) | B |
| Takeshi Kataoka and Michihisa Tsutahara | Transverse instability of surface solitary waves | Journal of Fluid Mechanics, 512, 211-221 (2004) | A |
| Takeshi Kataoka and Michihisa Tsutahara | Transverse instability of surface solitary waves | ICTAM04 CD-ROM Proceedings, ISBN 83-89687-01-1, published by IPPT PAN, Warsaw, FM26_11746 (2004) | C |
| Takaharu Tanaka | An Investigation on Definition of Theoretical Head Produced by Impeller Blade in Centrifugal Pump | The
3rd International Conference on Heat Transfer, Fluid Mechanics, and
Thermodynamics, HEFAT 2004, at Cape Town, South Africa, on June 21-24,
Proceedings of the conference, Paper No.TT1(2004) | B |
| Takaharu Tanaka and Chao Liu* | Interrelation between Fluid Particles Rotational Motion in Rotating Flow Passage of Centrifugal Pump and Overall Efficiency | The
US ASME-JSME Joint Fluids Engineering Division Summer Meeting at
Charlotte, North Carolina, USA on July 11-15, ASME paper
FEDSM2004-56534(2004) | B |
| Takaharu Tanaka and Chao Liu* | An Investigation on Velocity Triangle Applied to Fluid Particle at Rotating Flow Passage of Impeller Blade in Centrifugal Pump | The
7th Biennial ASME Conference on Engineering Systems Design And Analysis
(ESDA 2004) at The University of Manchester, Manchester, United
Kingdom, on July 19-22, ASME paper. ESDA2004/ATF-066(2004) | B |
| Takaharu Tanaka | Theoretical Investigation on Flow Rate at the Maximum Efficiency Point in the Design of Impeller Blade in Centrifugal Pump | The
ASME Pressure Vessels and Piping Conference at La Jolla, San Diego,
California, USA on July 25--29, 2004, Proceedings of the conference
entitled “Risk and Reliability and Evaluation of Components and
Machinery” ASME PVP-Vol.488, PVP2004-3012, 111-117(2004) | B |
| Takaharu Tanaka | An Investigation on Theoretical Head Produced by Centrifugal Pump and Water Turbine Blades | The
Third International Symposium on Fluid Machinery and Fluid Engineering
(3rd ISFMFE), on December 1-3, proceedings of the conference,
278-286(2004) | B |
| H. K. Kang*, M. Tsutahara, K. Shikata, E.R. Kim*, Y.T. Kim* and Y. H. Lee* | Computation of Aerodyanmic Sound at Low Mach Numbers Using Finite Difference Lattice Boltzmann Method | Journal of Computational Fluids Engineering, 10(1), 8-15(2005) | A |
| N.Takenaka, Y.Nakagawa, D.Onojima, Y.Kiyanagi*, M.Kawai*, M.Furusaka* | Thermal Hydraulic Design and Safety Considerations of a Solid Target for an Intense Proton Beam | Proc. 4th Japan-Korea Symp. on Neclear Thermal Hydraulics and Safety, NTHAS-4, 249-256 (2004). | B |
| N.Takenaka, S.Hosokawa, M.Hase, D.Onojima, N.Nakamura*, T.Ooumaya* | Investigation
of Flow Structure and Temperature Fluctuation in a Closed Branch Pipe
Connected to High Velocity and High Temperature Flow in a Main Pipe | Proc. 4th Japan-Korea Symp. on Neclear Thermal Hydraulics and Safety, NTHAS-4, 43-50 (2004). | B |
| Nobuyuki Takenaka, Akira Inada, Yusuke Nakagawa | Pressure Drop Modeling of Subcool Boiling Two-Phase Flow | Proc. 5th Int. Conf. on Multiphase Flow on CD-Rom, Paper No.474 (2005). | C |
| Nobuyuki Takenaka, Yusuke Nakagawa, Keisuke Kawakita | Effects of Wettability on Gas-Mercury Two-Phase Flow Heat Transfer | Proc. 5th Int. Conf. on Multiphase Flow on CD-Rom, Paper No.473 (2005). | C |
| Nobuyuki Takenaka, Satoshi Kawano, Atsushi Matsumoto | Void Fraction Distribution of Gas-Liquid Two-Phase Flow in a Rod Bundle by Neutron Radiography | Proc. 5th Int. Conf. on Multiphase Flow on CD-Rom, Paper No.472 (2005). | C |
| Shuji Furui*, Hiasashi Umekawa*, Yoshihiro Ohnishi*, Masashi Okura*, Mamoru Ozawa*, Nobuyuki Takenaka | Segregation Process of Binary Mixture in a Gas-Solid Fluidized Bed | Proc. 5th Int. Conf. on Multiphase Flow on CD-Rom, Paper No.590 (2004) | C |
| N. Takenaka, K. Kawabata, T. Nakazawa*, Y. Kawabata*, I. C. Lim*, C. M. Cim* | Cavitation Phenomena in a Real Metallic Fuel Injection Nozzle of Diesel Engine | Proc. Japan-US Seminar on Two-Phase Flow Dynamics, 1, 237-244 (2004) | C |
| Y.Kawabata*, T.Nakano*, M.Hino*, H.Sunohara*, U.Matsushima*, N.Takenaka | High Contrast Neutron Radiography with Optical Devices in Kyoto University Reactor | Nuclear Instruments and Methods in Physics Research A, 529, 238-242 (2004). | A |
| Nobuyuki Takenaka, Youichi Tagami, Hitoshi Asano | Measurement Uncertainly of Gas-Liquid Two-Phase Flow by Neutron Radiography | Neutron Radiography (7), Edited by P. Chirico and R. Rosa, 479-486 (2005). | A |
| N. Takenaka, S. Kawano, A. Matsumoto | Quantitative Measurement of Void Fraction Distributions in Gas-Liquid Two-Phase Flow by Neutron Radiography | Key Engineering Materials, 270-273, 1356-1360 (2004) | A |
| N. Takenaka, T. Kadowaki, K. Tohara, K. Kawabata, Y. Kawabata*, I.C. Lim*, C.M. Sim* | Towards the Visualization of Fuel Cavitation in a Nozzle of a Diesel Engine by Neutron Radiography | Key Engineering Materials, 270-273, 1349-1355 (2004) | A |
| Nobuyuki Takenaka, Hitoshi Asano | Quantitative Void Fraction Measurement Method by Neutron Radiography and Some Applications | Experimental Thermal and Fluid Science, 29(3), 393-402 (2005) | A |
| Mamoru Ozawa*, Hisashi Umekawa*, Shuji Furui*, K.Hayashi*, Nobuyuki Takenaka | Quantitative Flow Visualization of Fluidized-Bed Heat Exchanger by Neutron Radiography | Applied Radiation and Isotopes, 61(4), 715-724 (2004) | A |
| 藤井照重, 和田賢宣, 成田啓圭, 浅野等, 杉本勝美, 遠山伸一*, 川崎春夫* | 潜熱利用流体ループ式排熱システムの動特性解析と実験結果の比較 | 日本機械学会論文集(B編), 70 (699), 2928-2934 (2004) | A |
| 浅野等, 藤井照重, 竹中信幸, 前田憲男 | プレート熱交換器内気液二相流の流動特性に関する研究（単一流路内の流動挙動の可視化及びボイド率分布の計測） | 日本機械学会論文集(B編), 70(700), 3136-3141 (2004) | A |
| 藤井照重, 和田賢宣, 成田啓圭, 浅野等, 杉本勝美, 遠山伸一*, 川崎春夫* | 潜熱利用流体排熱システムにおける蒸気弁操作による温度制御 | 日本機械学会論文集(B編), 71(703), 908-913 (2005) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Eiji Nakamatsu, Youichi Tagami, Keishi Takeshima* | Image Processing Methods to Obtain Symmetrical Distribution from Projection Image | Applied Radiation and Isotopes, 61, 625-630 (2004) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Norio Maeda | Visualization and Void Fraction Measurement of Gas Liquid Two-Phase Flow in Plate Heat Exchanger | Applied Radiation and Isotopes, 61, 707-713 (2004) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Hidenori Hayashi, Toshiaki Wakabayashi | Visualization
and Void Fraction Measurement of Gas-Liquid Two-Phase Flow in a
Commercial Plate Heat Exchanger by Thermal Neutron Radiography | Neutron Radiography (7), Edited by P. Chirico and R. Rosa, 487-495 (2005) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Eiji Nakamatsu, Youichi Tagami, Keishi Takeshima* | Image
Processing Methods to Obtain Cross-Sectional Void Fraction Distribution
of Gas-Liquid Two-Phase Flow from a Projection Image by Neutron
Radiography | Neutron Radiography (7), Edited by P. Chirico and R. Rosa, 789-798 (2005). | A |
| S.Furui*, H.Umekawa*, K.Hayashi*, M.Ozawa*, N.Takenaka | Flow Visualization of Segregation Process in a Fluidized-Bed by Neutron Radiography | IEEE Trans. on Nuclear Science, 52(1), 295-298 (2005) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Hidenori Hayashi, Toshiaki Wakabayashi | Visualization
and Void Fraction Measurement of Gas-Liquid Two-Phase Flow in a
Commercial Plate Heat Exchanger by Thermal Neutron Radiography | IEEE Trans. on Nuclear Science, 52(1), 280-284 (2005) | A |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Toshiaki Wakabayashi | Adiabatic Gas-Liquid Two-Phase Flow Characteristics in a Commercial Plate Heat Exchanger | Proc. 5th Int. Conf. on Multiphase Flow on CD-Rom, Paper No.172 (2005). | C |
| Hitoshi Asano, Nobuyuki Takenaka, Terushige Fujii, Toshiaki Wakabayashi | Adiabatic Gas-Liquid Two-Phase Flow Characteristics in a Plate Heat Exchanger | Proc. Japan-US Seminar on Two-Phase Flow Dynamics, 1, 207-215 (2004) | C |
| 川崎春夫*, 藤井照重 | 宇宙用潜熱利用排熱ループシステムのアキュムレータ制御特性実験 | 日本機械学会論文集(B編), 71(705), pp.1414-1423 (2005) | A |
| 杉本勝美, 藤井照重 | エクセルギーコストの最小評価手法に関する研究 | 神戸大学大学院自然科学研究科 紀要, 23-B, 21-26 (2005) | D |
| Gian Piero Celata*, Maurizio Cumo*, Francesco D'Annibale*, Akio Tomiyama | The Wake Effect on Bubble Rising Velocity in One-Component Systems | Int. J. Multiphase Flow, 30, pp.939-961 (2004). | A |
| Shigeo Hosokawa, Akio Tomiyama | Turbulence modification in gas-liquid and solid- liquid dispersed two-phase pipe flows | International Journal of Heat and Fluid Flow, 25-3, pp. 489-498 (2004). | A |
| Shigeo Hosokawa, Akio Tomiyama | Molecular tagging velocimetry based on photobleaching reaction and its application to flows around single fluid particles | Multiphase Science and Technology, 16-4, pp. 335-353 (2004). | A |
| 宋 明良, 林 公祐, 冨山明男 | 界面を含む流れの体積追跡法（界面再構築法の改良） | 日本機械学会論文集(B編), 70-698, pp. 2538-2544 (2004). | A |
| 玉井秀定*, 冨山明男 | 三次元One-Way気泡追跡法に基づく未発達気泡・スラグ流の予測(第1報：モデル及び計算例) | 日本機械学会論文集(B編), 70-692, pp.880-887 (2004). | A |
| 玉井秀定*, 冨山明男 | 三次元One-Way気泡追跡法に基づく未発達気泡・スラグ流の予測(第2報：実験結果と計算結果の比較) | 日本機械学会論文集(B編), 70-692, pp.888-895 (2004). | A |
| 高田尚樹*, 冨山明男 | 統計熱力学的界面モデルを用いたせん断流中における液滴挙動の数値シミュレーション | 日本機械学会論文集(B編), 70-699, pp.2712-2720 (2004). | A |
| 高田尚樹*, 冨山明男 | PHASE-FIELD MODELに基づく二相流数値計算手法 | 日本機械学会論文集(B編), 71-701, pp.117-124 (2004). | A |
| 島田直樹*, 冨山明男 | 流体密度の温度・圧力依存性を考慮した気液二相流の数値解法 | 化学工学論文集, 31-1, pp.15-24 (2005). | A |
| 細川茂雄, 冨山明男 | 鉛直円管内低粒子濃度固気二相流の乱流変調に及ぼす相間相対速度の影響 | 混相流, 18-3, pp. 255-262 (2004). | A |
| Gian Piero Celata*, Francesco D'Annibale*, Paolo Di Marco*, Walter Grassi*, Gianlucca Memori*, Akio Tomiyama | Bubble Rising Velocity in One and Two-Component Systems | 42nd European Two-Phase Flow Group Meeting, Genova, Italy (2004). | B |
| Gian Piero Celata*, Maurizio Cumo*, Francesco D'Annibale*, Paolo Di Marco*, Akio Tomiyama, Chiara Zovini* | Effect of Gas Injection Mode and Purity of Liquid on Bubble Rising in Two-Component Systems | 42nd European Two-Phase Flow Group Meeting, Genova, Italy, pp.1-15 (2004). | B |
| Gian Piero Celata*, Maurizio Cumo*, Francesco D'Annibale*, Akio Tomiyama | The Wake Effect on the Rising Velocity of Small Bubbles | 42nd European Two-Phase Flow Group Meeting, Genova, Italy, pp.1-10 (2004). | B |
| Akio Tomiyama | Drag, Lift and Virtual Mass Forces acting on a Single Bubble | 3rd Int. Symp. on Two-Phase Flow Modelling and Experimentation (CD-ROM), Pisa, Italy, pp.1-10 (2004). | B |
| Akio Tomiyama, Kenichi Sakoda, Gian Piero Celata*, Iztok Zun* | A Simple Method for Evaluating Fluctuating Bubble Velocity and Its Application to a Hybrid Bubble Tracking Method | 3rd Int. Symp. on Two-Phase Flow Modelling and Experimentation (CD-ROM), Pisa, Italy, pp.1-10 (2004). | B |
| Hisashi Ninokata*, Michio
Sadatomi*, Tomio Okawa*, Akimi Serizawa*, Kaichiro Mishima*, Seiichi
Koshizuka*, Akio Tomiyama, Yasushi Yamamoto*, Yoshiro Kudo*, Akitoshi
Hotta*, Koji Nishida*, Noriyuki Shirakawa* | Current Status of Generalized Boiling Transition Model Development Applicable to a Wide Variety of Fuel Bundle Geometry | Proc. 6th Int. Conf. on Nuclear Thermal Hydraulics, Opereations and Safety (CD-ROM), Nara, Japan, P-ID:N6P363, pp.1-18 (2004). | B |
| Akio Tomiyama, Kenichi Sakoda, Kosuke Hayashi, Akira Sou, Naoki Shimada*, Shigeo Hosokawa | Modelong and Hybrid Simulation of Bubbly Flow (Keynote Lecture) | Proc. 6th US-Japan Seminar on Two-Phase Flow Dynamics, 1, pp. 1-16 (2004). | B |
| Akira Sou | Numerical Simulation of Electrostatic Micro-jet (Invited Lecture) | Proc. 2004 Int. Microprocesses and Nanotechnology Conf., (2004). | B |
| Munenori Maekawa*, Akio Tomiyama, M. Kageyama*, Satoru Yoshida, Akira Sou and Iztok Zun* | Effect of Bubble Size on a Bubble Plume and Bubbly Flow in a Bubble Column | 3rd Int. Symp. on Two-Phase Flow Modelling and Experimentation (CD-ROM), Pisa, Italy, (2004). | B |
| Shigeo Hosokawa, Akio Tomiyama | An image processing method for evaluating interface curvature and its application to gas-liquid bubble flows in a vertical pipe | Proc. 6th US-Japan Seminar on Two-Phase Flow Dynamics, 1, pp. 199-205 (2004). | C |
| Akira Sou, Akio Tomiyama, Shigeo Hosokawa, Shinji Nigorikawa, Yoichiro Matsumoto* | Cavitation and Internal Flow in a Two-Dimensional Injector Nozzle | Proc. 6th US-Japan Seminar on Two-Phase Flow Dynamics, 1 pp. 217-225 (2004). | C |
| Gian Piero Celata*, Maurizio Cumo*, Francesco D'Annibale*, Paolo Di Marco*, Akio Tomiyama, Chiara Zovini* | Effect of Gas-Injection Mode and Purity of Liquid on Bubble Rising in Two-Component Systems | Proc. 5th Int. Conf. on Multiphase Flow (CD-ROM), pp. 1-12 (2004). | C |
| Akira Sou, Akio Tomiyama, Shigeo Hosokawa, Shinji Nigorikawa, Yoichiro Matsumoto* | Visualization of Cavitation in a Two-Dimensional Nozzle and Liquid Jet | Proc. 5th Int. Conf. on Multiphase Flow (CD-ROM), Paper No. 479 (2004). | C |
| 能登勝久・藤本享右 | 正浮力後流の三次元熱流動解析(第2報：等温後流の三次元構造) | 日本機械学会論文集, B編, 70(693), 1300-1307 (2004) | A |
| 能登勝久・藤本享右 | 正浮力後流の三次元熱流動解析(第3報：三次元構造に与える正浮力の影響) | 日本機械学会論文集, B編, 70(693), 1308-1315 (2004) | A |
| 能登勝久・杉村 聡 | 円柱冷却によって低レイノルズ数で発生する冷却渦列(第1報：流れ分布の変化) | 日本機械学会論文集, B編, 70(693), 1316-1324 (2004) | A |
| 能登勝久・杉村 聡 | 円柱冷却によって低レイノルズ数で発生する冷却渦列(第2報：冷却後流の渦度構造と冷却渦列の発生メカニズム) | 日本機械学会論文集, B編, 70(693), 1325-1333 (2004) | A |
| 能登勝久・近藤俊二 | 安定成層内のサーマルプルームの三次元熱流動(温度場の特徴) | 日本機械学会論文集, B編, 70(699), 2967-2975 (2004) | A |
| 能登勝久・中井慶吾 | サーマルプルームの乱流遷移と乱流の数値解析(定式化と数値解析法) | 日本機械学会論文集, B編, 71(703), 922-930 (2005) | A |
| Katsuhisa Noto and Satoshi Mitsuhashi | Temperature Field with Thermal Cylinders in Buoyant Flow in Stably Stratified Air | Numerical Heat Transfer, Part A, 47(4), 763-785 (2005) | A |
| K. Yashiro, M. Oho and Y. Tomita | ab initio study on the lattice instability of silicon and aluminum under [001] tension | Computational Materials Science, 49(4), 397-406 (2004) | A |
| Y. Tomita, W. Lu, Y. Furutani | Micro- to Macroscopic Deformation Behavior of Carbon Black-filled Rubber under Monotonic and Cyclic Straining | Proc. CIMTEC 2004 Part B 121-132, CD-ROM (2004) | B |
| 屋代如月, 田端康史, 冨田佳宏 | Ni基超合金γ/γ'界面における刃状転位とらせん転位挙動の違い：分子動力学による検討 | 日本機械学会論文集A編, 70(693), 690-695 (2004) | A |
| 屋代如月, 伊藤智啓, 冨田佳宏 | ポリマーの結晶/非晶界面における分子鎖変形挙動の分子動力学解析 | 日本機械学会論文集A編, 70(693), 696-702 (2004) | A |
| W. Lu and Y. Tomita | Computational simulation of mechanical behavior of rubber-blended polymer with size dependence | Proc.
ICCES2004, Advances in Computational & Experimental Engineering
& Science, 1479-1484, CD-ROM, Tech Science Press (2004) | B |
| Makoto Uchida and Yoshihiro Tomita | Computational Simulation of Mesoscopic Deformation Behavior of Semi-Crystalline Polymer | Proc.
ICCES2004, Advances in Computational & Experimental Engineering
& Science, 1568-1573, CD-ROM, Tech Science Press (2004) | B |
| 安達泰治*, 河野雄二, 冨田佳宏 | 骨再生シミュレーションを用いたポーラススカフォールドの設計手法の提案 | 日本機械学会論文集, 70A(697), 1201-1207 (2004) | A |
| Y. Tomita, W. LU, Y. Furutani | Numerical Evaluation of Micro- to Macroscopic Mechanical Behavior of Carbon Black-filled Rubber | Key Engineering, Vols. 274-276, 19-24, Trans Tech Publications (2004) | A |
| Tomohiro Takaki, Toshimichi Fukuoka and Yoshihiro Tomita | Adaptive Finite Element Simulation during Directional Solidification of a Binary Alloy using Phase-Field Method | Proc. WCCM VI, The 2004 Sixth World Congress on Computational Mechanics (2004) CD version | C |
| Wei LU, Yoshihiro TOMITA | Numerical Evaluation of Debonding Behavior in Carbon Black-filled Rubber | Proc. WCCM VI, The 2004 Sixth World Congress on Computational Mechanics (2004) CD version | C |
| Naghi Esmaeili K. Wei Lu and Yoshihiro Tomita | Effects of Interphase Properties on the Mechanical Behavior of Trinary Polymer-Based Composites | Proc. WCCM VI, The 2004 Sixth World Congress on Computational Mechanics (2004) CD version | C |
| Naghi Esmaeili K., Wei Lu and Yoshihiro Tomita | Characterization of Micro- to Macroscopic Responses of Trinary Polymer-Based Composite System | Key Engineering, Vols. 274-276, 313-318, Trans Tech Publications (2004) | A |
| 内田真, 冨田佳宏 | 非晶性高分子材料の微視組織の不均一性が変形挙動に及ぼす影響 | 日本機械学会論文集, 70A(698), 1484-1490 (2004) | A |
| 山本裕介, 高木知弘, 冨田佳宏 | Phase Field法による多結晶金属の結晶粒成長シミュレーション | 日本機械学会論文集, 70A(699), 1551-1557 (2004) | A |
| Tadashi HASEBE | Field Theoretical Multiscale Polycrystal Plasticity | Trans. MRS-J, 29(8), 3619-3624 (2004) | A |
| 屋代如月, 金井雅之, 冨田佳宏 | AFM内曲げ試験によるポリエチレンラメラ組織の変形挙動観察 | 材料, 53(12), 1359-1364 (2004) | A |
| K. Mizukami* T. Hasebe T. Katayama* Y. Nakamura* Y. Imaida* | Study of the Impact Energy Absorption Characteristics of Environmental-Friendly FRP | High Performance Structures & Materials 2004, Ed. C. A. Brebbia, 451-460, WIT Press (2004) | A |
| 安達泰治*, 西海征志, 冨田佳宏 | ラット海綿骨の欠損モデルの作成と再生骨の力学特性評価 | 日本臨床バイオメカニクス学会誌, 25, 25-29 (2004) | A |
| S. V. Dmitriev*, T. Kitamura*, J. Li*, Y. Umeno*, K. Yashiro and N. Yoshikawa* | Near-Surface Lattice Instability in 2D Fiber and Half-Space | Acta Materialia, 53, 1215-1224 (2005) | A |
| 屋代如月, 山上勝也, 久保圭佑, 冨田佳宏 | NiおよびNi3Al単結晶の第一原理格子不安定解析 | 日本機械学会論文集, 71A(702), 213-218 (2005) | A |
| Naghi Esmaeili and Y. Tomita | Computational Characterization of Micro- to Macroscopic Mechnaical Behavior of Ternary Polymer-based Composit | Proc.
Plasticity 2005 Dislocations, Plasticity, Damage and Metal Forming:
Material Response and Multiscale Modeling, Editors: Akhtar S. Kan and
Amir R. Khoei, Neat Press, 511-513 (2005) | C |
| Y. Tomia, Lu Wei and Y. Furutani | Computational Characterization of Carbon Black Filled Rubber Under Monotonic and Cyclic Deformation | Proc.
Plasticity 2005 Dislocations, Plasticity, Damage and Metal Forming:
Material Response and Multiscale Modeling, Editors: Akhtar S. Kan and
Amir R. Khoei, Neat Press, 526-528 (2005) | C |
| 斉藤賢司, 池田周之*, 槙井浩一*, 赤水宏*, 冨田佳宏 | 低C-TRIP鋼のひずみ速度及び温度依存性塑性変形挙動 | 日本機会学会論文集, 71A(703), 465-471 (2005) | A |
| 横井真, 桐村剛, 長谷部忠司, 今井田豊 | 密閉型水中放電成形法によるアルミニウム箔の深絞り成形に関する実験的研究 | 材料, 44(500), 602-607 (1995) | A |
| 河原敏彦*, 長谷部忠司, 今井田豊* | 線爆溶射に関する基礎的研究 -溶射皮膜層に及ぼす放電特性の影響- | 材料, 45(7), 817-822 (1996) | A |
| 艦将孝*, 落合由敬*, 長谷部忠司, 今井田豊* | 水中衝撃波フォーカッシングに関する基礎的研究 -非線形反射とフォーカッシング効果について- | 材料, 45(10), 1151-1156 (1996) | A |
| M. Kanda*, M. Sakane*, M. Ohnami*, T. Hasebe | High Temperature Multiaxial Low Cycle Fatigue of CMSX-2 Ni-Base Single Crystal Superalloy | Trans. ASME, J. Engng. Mater. Technol., 119(2), 153-160 (1997) | A |
| 長谷部忠司, 今井田豊*, 芝原顕* | FCC金属における転位相互作用のモデル化と非比例繰返し負荷への適用 | 材料, 46(5), 475-480 (1997) | A |
| T. Hasebe, S. Kumai*, Y. Imaida* | Impact Compression Behavior of FCC Metals with Pre-Torsion Behavior | J. Maters. Process. Technol., 85, 184-187 (1998) | A |
| T. Hasebe, Y. Takenaga*, H. Kakimoto*, Y. Imaida* | High Strain Rate Forming Using Underwater Shock Wave Focusing Technique | J. Maters. Process. Technol., 85, 194-197 (1998) | A |
| 長谷部忠司, 今井田豊*, 中元均* | FCC金属の衝撃圧縮挙動に及ぼすねじり予ひずみの影響 | 材料, 47(1), 26-32 (1998) | A |
| T. Hasebe, Y. Imaida* | Construction of Quantum Field Theory of Dislocations based on the Non-Riemannian Plasticity | Acta. Metall. Sinca, 11(6), 405-411 (1998) | A |
| K. Horiuchi*, M. Ishiyama*, T. Hasebe, K. Yukimura*, Y. Imaida* | A Fundamental Study of Excimer Laser Ablation using Experimental and MD Simulation Method | Maters. Chem. Phys., 54, 201-204 (1998) | A |
| T. Hasebe, Y. Imaida* | Gauge Field Theory of Dislocations and the Non-Riemannian Plasticity | Progress in Mechanical Behavior of Materials, Vol.III, Eds. F. Ellyn, J.W. Provan, 1077-1082 (1999) | A |
| 長谷部忠司 | 場の理論と結晶塑性理論 | 材料, 48(7), 963-970 (1999) | A |
| K. Mizukami*, T. Hasebe, T. Katayama*, Y. Nakamura*, Y. Imaida* | Study of the Impact Energy Absorption Characteristics of GFRTP and JFRTP Deep-Drawn Products | High Performance Structure and Composite, 107-116, WIT Press (2003) | A |
| K. Mizukami*, T. Hasebe, T. Katayama*, Y. Nakamura*, Y. Imaida* | Design of Impact Energy Characteristics of FRP Deep-Drawn Product | Materials Science Forum Vols.465-466 Trance, 43-48, Tech Publications (2004) | A |
| T. Hasebe | Continuum Description of Inhomogeniousely Deforming Polycrystalline Aggregate based on Field Theory | Meso-Scale Simulation and Modeling of Strength and Fracture of Materials, Eds. H. Kitagawa, and Y. Shibutani, Kluwer (2003) | A |
| M. Kanda*, M. Sakane*, M. Ohnami*, T. Hasebe | High Temperature Multiaxial Low Cycle Fatigue of Ni-base Single Crystal Superalloy | Proc. Thermal Stress "95, 481-484 (1995) | C |
| T. Hasebe, S. Kumai*, Y. Imaida* | Flow Stress of FCC Metals under Unsteady Transient Loadings | Dynamic Plasticity and Structural Behaviors, 825-828, Gordon and Breach Publishers (1995) | C |
| T. Hasebe, Y. Imaida*, M. Yokoi* | Flat-Headed Cylindrical Deep Drawing of Aluminum Foil by Hydro Spark Forming Method | Dynamic Plasticity and Structural Behaviors, 991-994, Gordon and Breach Publishers (1995) | C |
| T. Hasebe, Y. Imaida* | Hardening Behavior of FCC Crystals under Non-proportional Loadings | Proc. 1995 Japan-Sino Bilateral Symp. on High Temperature Strength of Materials, 135-140 (1995) | C |
| T. Hasebe, Y. Imaida* | Strain
Rate and Strain History Effects on Hardening Behavior of FCC Metals
under Dynamic Loading -Constitutive Modelling based on the Crystalline
Plasticity- | Proc. AEPA '96, 375-362 (1996) | C |
| T. Hasebe, S. Shima*, Y. Imaida* | On Flexible Drawing by Incremental Hammering | Proc. AEPA '96, 715-720 (1996) | C |
| T. Hasebe, Y. Imaida* | High Strain Rate Deep Drawing by Hydro-Spark Forming.Method | Proc. NUMISHEET '96, 372-379 (1996) | C |
| T. Hasebe, Y. Imaida*, M. Yokoi* | Effect of Blank Holder Force on Limiting Drawing Height in Hydro-Spark Forming | Proc. 5th ICTP, 797-800 (1996) | C |
| T. Hasebe, S. Shima*, Y. Imaida* | Deformation Analysis in Incremental Hammering | Proc. 5th ICTP, 951-954 (1996) | C |
| T. Hasebe, Y. Imaida* | Modelling of Strain Rate-Strain History Coupling Effect | Proc. SMiRT 14, 13-20 (1997) | C |
| T. Hasebe, Y. Imaida* | General Framework of Field Theory of Dislocations | Proc. 3rd. Sino-Japan Bilateral Symp. High Temperature Strength of Materials, 30-37 (1998) | C |
| T. Hasebe, Y. Imaida* | Dislocation Pileup Model for Back Stress Evolution in Crystalline Plasticity | Proc. SMiRT 15, pp.801-808 (1999) | C |
| T. Hasebe, Y. Imaida* | Crystal Plasticity Modeling based on Field Theory of Dislocations and Plasticity | Proc. Japan-Korea 1st Symp. on Eng. Mech., 50-54 (2000) | C |
| T. Hasebe | Hardening Behavior of Materials under Impact Loading | Proc. THERMECH 2000, 162-165 (Invited) (2000) | C |
| T. Hasebe | Cross Hardening Effect of IF Steels | Proc. Int. Forum Properties and Appl. IF Steels, 128-138 (Invited) (2003) | C |
| T. Hasebe | Gauge Field Theoretical Approach to Cell Formation Process | Proc. IUMRS-ICAM2003, 256-262 (Invited) (2003) | C |
| K. Mizukami*, T. Hasebe, T, Katayama*, Y. Nakamura*, Y. Imaida* | Design of Impact Energy Characteristics of FRP Deep-Drawn Product | Proc. 1st. ESHP Symp (2004) | C |
| Yoshikazu NAKAI | Evaluation of Fatigue Damage of Metals by Means of Atomic Force Microscopy | Fracture Damage of Structural Parts, edited by Zdenek Buzek and Bohumir Strnadel, pp.173-180, Vydavatelstvi VSB (2004). | A |
| Yoshikazu Nakai, Manabu Kishimoto, and Shohei Hosomi | Characterization of fatigue crack initiation condition of steels with AFM | Proc. ICF 11 (2005) (CD-ROM) | B |
| 中井善一, 橋本晃久, 竹谷彰彦 | 金属細線の疲労試験法の開発と疲労強度の寸法効果 | 材料, 第54巻, 第3号, pp.284-289, (2005) | A |
| 塩沢大輝, 久保司郎*, 阪上隆英*, 奥野康輔* | ピエゾ材料を用いた受動型電気ポテンシャルCT法によるき裂同定に関する実験的検討 | 材料, 51巻(8号), pp.926-931, (2002) | A |
| Daiki Shiozawa, Shiro Kubo*, Takahide Sakagami* | Identification of Delamination Defect in Laminated Composites by Passive Electric Potential CT Method | Inverse Problems in Engineering Mechanics IV Masataka Tanaka(Editor), Elsecier Science, pp.195-203, (2003) | A |
| Daiki Shiozawa, Shiro Kubo*, Takahide Sakagami* | Passive Electric Potential CT Method Using Piezoelectric Material for Crack Identification | Inverse Problems in Engineering, Vol.12, No.1, pp.71-79, (2004). | A |
| Daiki Shiozawa, Shiro Kubo*, Takahide Sakagami* | An Experimental Study on Applicability of Passive Electric Potential CT Method to Crack Identification | JSME International Journal, Vol.47, No.3, pp.419-425, (2004) | A |
| H. Yasuda, H. Mori* and J. G. Lee* | Electron-irradiation-induced
phase separation in GaSb nanoparticles, H. Yasuda, H. Mori and J. G.
Lee, Phys. Rev. B, 70 (2004)
214105-1-214105-6.Electron-irradiation-induced phase separation in GaSb
nanoparticles | Phys. Rev. B, 70, 214105-1-214105-6, (2004) | A |
| H. Yasuda, H. Mori* and J. G. Lee* | Effect of electron energy on the phase separation induced by electronic excitation in GaSb particles | Proc. 13th European Microscopy Congress, 17-218, (2004) | C |
| H. Yasuda, H. Mori* and J. G. Lee* | Frontiers of phase formation and control in nanoparticles by in-situ TEM | Proc. Asia Pasific Nanotechnology Forum (2004) | B |
| A. Tanaka, A. Chainani*, T. Miura*, T. Takahashi*, T. Miyazaki*, S. Hasegawa*, T. Mori* | Synchrotron-radiation photoemission study of in-situ synthesized DCNQI (N,N'-dicyanoquinonediimine)-Cu salts | Solid States Commun. 93, 1-5 (1995) | A |
| A. Tanaka, A. Chainani*, T. Yokoya*, T. Takahashi*, T. Miyazaki*, S. Hasegawa*, T. Mori* | Electronic structure of the quasi-one-dimensional organic conductors DCNQI (N,N'-dicyanoquinonediimine)-Cu salts | Phys. Rev. B 52, 7951-7959 (1995) | A |
| T. Arai*, A. Tanaka, K. Matsuishi*, S. Onari*, Y. Maruyama*, M. Ishikawa* | Femtosecond pump-probe studies of CdSe microcrystals embedded in a germanium dioxide glass matrix | SPIE 2362, 304-311 (1995) | A |
| A. Tanaka, A. Chainani*, T. Yokoya*, T. Takahashi*, T. Miyazaki*, S. Hasegawa*, T. Mori* | Electron spectroscopic studies of organic conductors DCNQI (N,N'-dicyanoquinonediimine)-Cu salts | J. Electron Spectrosc. Relat. Phenom. 78, 469-472 (1996) | B |
| T. Takahashi*, T. Yokoya*, A. Chainani*, A. Tanaka, H. Kumigashira*, O. Akaki*, R. Kato* | High-resolution photoemission study of deutrated dimethyl-dicyanoquinonediimine-Cu compounds; (DMe-DCNQI)2Cu | J. Electron Spectrosc. Relat. Phenom. 78, 441-444 (1996) | B |
| A. Tanaka, K. Takahashi*, M. Hatano*, K. Tamura*, S. Suzuki*, S. Sato* | Photoemission study of quantum confinement effects on noble-metal nanofilms | J. Surf. Anal. 3, 468-472 (1997) | B |
| A. Tanaka, K. Tamura*, K.
Takahashi*, M. Hatano*, T. Okane*, S. Suzuki*, S. Sato*, S. Kunii*, A.
Harasawa*, A. Kimura*, A. Kakizaki* | Resonant photoemission study of single crystalline NdB6 clean surface | Physica B 240, 123-127 (1997) | A |
| A. Tanaka, K. Tamura*, H.
Tsunematsu*, K. Takahashi*, M. Hatano*, S. Suzuki*, S. Sato*, S.
Kunii*, A. Harasawa*, A. Kimura*, A. Kakizaki* | Surface electronic structure of the NdB6(110) clean surface studied by angle-resolved photoemission spectroscopy | Phys. Rev. B 56, 7660-7664 (1997) | A |
| A. Tanaka, S. Onari*, T. Arai* | Low-frequency Raman scattering from CdS microcrystals embedded in a germanium dioxide glass matrix | Phys. Rev. B 56, 9977-9977 (1997) | A |
| A. Tanaka, K. Tamura*, H. Tsunematsu*, K. Takahashi*, M. Hatano*, S. Suzuki*, S. Sato*, S. Kunii* | Angle-resolved photoemission study of surface electronic structure on NdB6(110) clean surface | J. Electron Spectrosc. Relat. Phenom. 88-91, 637-641 (1998) | B |
| K. Takahashi*, A. Tanaka, M. Hatano*, H. Sasaki*, S. Suzuki*, S. Sato* | Angle-resolved photoemission study of quantized electronic structures on Ag nanofilms | J. Electron Spectrosc. Relat. Phenom. 88-91, 347-351 (1998) | B |
| A. Tanaka, M. Hatano*, K. Takahashi*, H. Sasaki*, S. Suzuki*, S. Sato* | Bulk and surface electronic structures of the semimetal Bi studied by angle-resolved photoemission spectroscopy | Phys. Rev. B 59, 1786-1791 (1999) | A |
| S. Fujimori*, Y. Saito*,
M. Seki*, K. Tamura*, M. Mizuta*, K. Yamaki*, K. Sato*, A. Tanaka*, N.
Sato*, S. Suzuki*, S. Sato*, T. Okane*, T. Komatsubara*, Y. Tezuka*, S.
Shin*, T. Ishii* | Absence of U 5f band states in resonant photoemission spectra of UPd2Al3 | Phys. Rev. B 59, 10469-10472 (1999) | A |
| H. Tsunematsu*, M. Aita*, A. Tanaka, S. Suzuki*, S. Sato*, Y. Gotoh* | RHEED observation and ARUPS study of Ni on Mo(110) surface | J. Electron Spectrosc. Relat. Phenom. 101-103, 281-285 (1999) | B |
| S. Fujimori*, Y. Saito*,
K. Yamaki*, M. Seki*, K. Tamura*, M. Mizuta*, T. Okane*, K. Sato*, A.
Tanaka, Y. Tezuka*, S. Shin*, N. Sato*, T. Komatsubara*, S. Suzuki*, S.
Sato* | The U 5f states in the heavy-fermion uranium compound UPd2Al3 studied by resonant and x-ray photoelectron spectroscopy | J. Electron Spectrosc. Relat. Phenom. 101-103, 439-442 (1999) | B |
| A. Tanaka, K. Takahashi*, H. Sasaki*, W. Gondo*, S. Suzuki*, S. Sato*, M. Tsuchiko*, Y. Takahashi*, K. Ohshima* | Temperature dependence of photoemission spectra and x-ray diffraction of Ag nanofilm | Jpn. J. Appl. Phys. 38, 336-339 (1999) | A |
| A. Tanaka, H. Hatano*, K. Takahashi*, H. Sasaki*, S. Suzuki*, S. Sato* | Growth and angle-resolved photoemission studies of bismuth epitaxial films | Surf. Sci. 433-435, 647-651 (1999) | B |
| K. Takahashi*, A. Tanaka, H. Sasaki*, H. Hatano*, S. Suzuki*, S. Sato* | Electron-phonon interaction of quantum-well states on Ag nanofilms studied by temperature-dependent photoemission spectroscopy | Surf. Sci. 433-435, 873-877 (1999) | B |
| A. Tanaka | Quantized electronic structure in mesoscopic metal-nanofilms studied by angle-resolved photoemission spectroscopy | Proc.
1st UK-JAPAN International Seminar of Application of Synchrotron
Radiation to the Studies of Nano-Structured Materials, 23-29 (1999) | B |
| A. Tanaka, H. Sasaki*, K. Takahashi*, W. Gondo*, S. Suzuki*, S. Sato* | Photoemission study of Ag nanofilm grown on pseudomorphic fcc Fe(100) | J. Phys. Chem. Solids 60, 1995-1999 (1999) | A |
| K. Takahashi*, A. Tanaka*, H. Sasaki*, W. Gondo*, S. Suzuki*, S. Sato* | Temperature-dependent angle-resolved photoemission study for quantum-well states in Ag nanofilms | Phys. Rev. B 60, 8748-8752 (1999) | A |
| A. Tanaka, H. Sasaki*, K. Takahashi*, W. Gondo*, S. Suzuki*, S. Sato* | Growth and photoemission studies of Ag nanofilms on pseudomorphic fcc Fe(100) | Appl. Surf. Sci. 169-170, 168-171 (2001) | B |
| K. Takahashi*, A. Tanaka, H. Sasaki*, W. Gondo*, S. Suzuki*, S. Sato* | Angle-resolved photoemission study of double Ag-nanofilm structures | Appl. Surf. Sci. 169-170, 164-167 (2001) | B |
| H. Sasaki*, A. Tanaka, K. Takahashi*, W. Gondo*, S. Suzuki*, S. Sato* | Electronic coupling of quantized states in Ag nanofilms with fcc Fe(100) substrates | Appl. Surf. Sci. 169-170, 496-499 (2001) | B |
| S. K. Hong*, T. Hanada*, H. Makino*, H. J. Ko*, Y. Chen*, T. Yao*, A. Tanaka, H. Sasaki*, S. Sato*, D. Imai*, M. Shinohara* | ZnO epilayers on GaN templates: polarity control and valence band offset | J. Vac. Sci. Technol. B 19, 1429-1433 (2001) | A |
| A. Tanaka, K. Takahashi*, H. Sasaki*, S. Suzuki*, S. Sato* | Electronic structure of Ag/Cu/Ag/Cu(111) double nanofilm structures studied by angle-resolved photoemission spectroscopy | Mat. Res. Soc. Symp. Proc. 648, P3.36.1-P3.36.6 (2001) | B |
| S. K. Hong*, T. Hanada*, H. Makino*, Y. Chen*, H. J. Ko*, T. Yao*, A. Tanaka, H. Sasaki*, S. Sato* | Band alignment at a ZnO/GaN(0001) heterointerface | Appl. Phys. Lett. 78, 3349-3351 (2001) | A |
| T. Nagasawa*, A. Tanaka, H. Sasaki*, Y. Kuriyama*, S. Suzuki*, S. Sato*, T. Sekine* | Photoemission study of thiol-capped gold nanoparticles | Mat. Res. Soc. Symp. Proc. 704, 319-324 (2002) | B |
| A. Tanaka, T. Nagasawa*, Y. Takeda*, N. J. Watkins*, Y. Gao* | Time-resolved two-photon photoemission study of dodecanethiolate-passivated Ag nanoparticles | J. Phys. Soc. Jpn. 71, 3098-3099 (2002) | A |
| H.-Y. Lee*, H. Makino*, T. Yao*, A. Tanaka* | Si-based omnidirectional reflector and transmission filter optimized at a wavelength of 1.55 μm | Appl. Phys. Lett. 81, 4502-4504 (2002) | A |
| A. Tanaka, Y. Takeda*, T. Nagasawa*, S. Sato* | Dynamic
final-state nanoparticle-substrate interaction in the photoemission of
dodecanethiolate-passivated Ag nanoparticles on graphite substrates | Phys. Rev. B 67, 033101-1-033101-4 (2003) | A |
| A. Tanaka, Y. Takeda*, T. Nagasawa*, S. Sato* | Dynamic
final-state nanoparticle-substrate interaction in the photoemission of
dodecanethiolate-passivated Ag nanoparticles on graphite substrates | Virtual J. Ultrafast Sci. 2, issue 2 (2003) | A |
| A. Tanaka, N. J. Watkins*, Y. Gao* | Hot-electron relaxation in layered semiconductor 2H-MoS2 studied by time-resolved two-photon photoemission spectroscopy | Phys. Rev. B 67, 113315-1-113315-4 (2003) | A |
| A. Tanaka, N. J. Watkins*, Y. Gao* | Hot-electron relaxation in layered semiconductor 2H-MoS2 studied by time-resolved two-photon photoemission spectroscopy | Virtual J. Ultrafast Sci. 2, issue 4 (2003) | A |
| A. Tanaka, Y. Takeda*, T. Nagasawa*, K. Takahashi* | Chemical states of dodecanethiolate-passivated Au nanoparticles: Synchrotron-radiation photoelectron spectroscopy | Solid State Commun. 126, 191-196 (2003) | A |
| A. Tanaka, K. Takahashi*, H. Sasaki*, W. Gondo*, S. Suzuki*, S. Sato* | Electronic coupling of quantum-well states in double Ag nanofilm structures | J. Phys. Soc. Jpn. 72, 879-883 (2003) | A |
| A. Tanaka, Y. Takeda*, T. Nagasawa*, H. Sasaki*, Y. Kuriyama*, S. Suzuki*, S. Sato* | Photoemission study of metallic nanoparticles passivated by dodecanethiolates: Silver nanoparticles | Surf. Sci. 532-535, 281-286 (2003) | B |
| A. Tanaka, Y. Takeda*, M. Imamura, S. Sato* | Femtosecond
nanoparticle-substrate interaction in the photoemission final-state of
surface-passivated metallic nanoparticles on graphite substrates | Trans. Mat. Res. Soc. Jpn. 28, 919-922 (2003) | B |
| A. Tanaka, Y. Takeda*, M. Imamura, S. Sato* | Dynamic
final-state effect on the Au 4f core-level photoemission of
dodecanethiolate-passivated Au nanoparticles on graphite substrates | Phys. Rev. B 68 195415-1-195415-5 (2003) | A |
| H. Sasaki*, A. Tanaka, Y. Kuriyama*, T. Nagasawa*, S. Suzuki*, S. Sato*, T. Nagase* | Angle-resolved photoemission study of CoSi2 nanofilms grown on Si(111) substrates | Solid State Commun. 129, 91-95 (2004) | A |
| A. Tanaka*, Y. Takeda*, M. Imamura, S. Sato* | Femtosecond dynamic final-state effect in photoemission of surface-passivated metallic nanoparticles on graphite substrates | Appl. Surf. Sci. 237, 537-542 (2004) | B |
| A. Tanaka, Y. Takeda* | X-ray photoemission study of dodecanethiolate-passivated Ag nanoparticles | J. Phys. Soc. Jpn. 73, 1543-1546 (2004) | A |
| H. Sasaki*, A. Tanaka, S. Suzuki*, S. Sato* | Comparative angle-resolved photoemission study of Ag nanometer films grown on fcc Fe(111) and bcc Fe(110) | Phys. Rev. B. 70, 115415-1-6 (2004) | A |
| H. Sasaki*, A. Tanaka, S. Ogasawara*, S. Suzuki*, S. Sato* | Angle-resolved photoemission study of Ag nanofilms grown on fcc transition-metal(111) substrates | Solid State Commun. 132, 719-724 (2004) | A |
| Yoshikazu FUJII, Takenori NAKAYAMA*, Kentaroh YOSHIDA | Roughness Estimation of Polycrystalline Iron Surface under High Temperature by Small Glancing Angle X-ray Scattering | ISIJ International, Vol.44 (2004), pp.1549-1553 | A |
| 木之下博, 酒向智也, 田川雅人, 大前伸夫, 小宮広志* | 円周走査型原子間力顕微鏡の開発 | トライボロジスト, 49(11), 886-893 (2004) | A |
| Tagawa M., Yokota K., Ohmae N., Matsumoto K.*, Suzuki M.* | Hyperthermal
atomic oxygen interaction with MoS2 lubricants relevance to space
environmental effects in low earth orbit –atomic oxygen-induced
oxidation | Tribology Letters, 17(4), 859-865 (2004) | A |
| Tagawa M., Ikemura M., Nakayama Y., Ohmae N. | Effect of water adsorption on the microtribological properties of hydrogenated diamond-like carbon film | Tribology Letters, 17(3) 575-580 (2004) | A |
| Tagawa M., Yokota K., Ohmae N | Synergistic study on atomic oxygen-induced erosion of polyethylene with 172 nm vacuum ultraviolet | Journal of Spacecraft and Rockets, 41(3), 345-349 (2004) | A |
| Minton T. K.*, Tagawa M., Nathanson G. M.* | Energy accommodation in hyperthermal gas-surface collisions: relevance to aerobraking in planetary atmosphere | Journal of Spacecraft and Rockets, 41(3), 389-396 (2004) | A |
| Tagawa M., Yokota K., Ohki Y., Ohmae N. | Spatially resolved wettability control of polymer surfaces using laser detonation hyperthermal atom beams | Journal of Adhesion Science and Technology, 18(2), 243-260 (2004) | A |
| Yokota K., Ohmae N., Tagawa M., | Effect of relative intensity of 5 eV atomic oxygen and 172 nm vacuum ultraviolet in the synergism of polyimide erosion | High Performance Polymers, 16(2), 221-234 (2004) | A |
| Yokota K., Seikyu S., Tagawa M., Ohmae N. | Enhancement
of Atomic Oxygen-Induced Erosion of Polyimide under Simultaneous Vacuum
Ultraviolet Exposure Conditions; A Quantitative Study | Proceedings of the 24th International Symposium on Space Technology and Science, Paper No.2004-c-38, (2004). | B |
| Sogo C., Tsumamoto S., Yokota K., Tagawa M., Ohmae N., | Ellipsometric Study on the Oxidation of Silicon by Atomic Oxygen in Space Environment | Proceedings of the 24th International Symposium on Space Technology and Science, Paper No.2004-h-02 (2004). | B |
| Seikyu S., Yokota K., Tagawa M., Ohmae N., | Surface Reaction of Atomic Oxygen with Spin-Coated Polyimide Films: Temperature Dependence of the Reaction Efficienc | Proceedings of the 24th International Symposium on Space Technology and Science, Paper No.2004-c-39 (2004). | B |
| Doi H., Yokota K., Tagawa M., Ohmae N., | A Computer Simulation of the Surface Scattering Event of Energetic Atomic Oxygen for Developing Atomic Oxygen | Proceedings of the 24th International Symposium on Space Technology and Science, Paper No.2004-h-03 (2004). | B |
| H. Kinoshita, I. Kume, M. Tagawa, and N. Ohmae | High friction of vertically aligned carbon nanotube film in microtribology | Applied Physics Letters | A |
| H. Kinoshita, I. Kume, M. Tagawa, and N. OhmaeH. Kinoshita, I. Kume, H. Sakai, M. Tagawa, N. Ohmae | High
growth rate of vertically aligned carbon nanotubes using a plasma
shield in microwave plasma-enhanced chemical vapor deposition | Carbon, 42(12-13) 2753-2455 (2004) | A |
| H. Kinoshita, I. Kume, M. Tagawa, and N. Ohmae | High friction of vertically aligned carbon nanotube film in microtribology | Applied Physics Letters, 85(14) 2780-2781 (2004) | D |
| 木之下博, 酒向智也, 田川雅人, 大前伸夫, 小宮広志* | 円周走査型原子間力顕微鏡の開発 | トライボロジスト, 49(11), 886-893 (2004) | A |
| Ohmae, N. | Atomic Oxygen Effects on Tribology of Molybdenum Disulfide and Diamond –like Carbon | Proc. 4th AIMETA International Tribology Conference, Rome, Italy, pp.743-750(2004) | A |
| 大須賀 公一, 久保 仁*, 水瀬 雄樹*, 上島 和郎*, 中村 陽一* | パラレルマニピュレータのヤコビ行列の特性を活かした順運動学計算法と制御系の提案および安定性解析 | 日本ロボット学会誌, Vol.22, No.5, pp.106-113, (2004) | A |
| S.Ashida*, K. Osuka | Master slave control of two-armed-rescue-manipulator with self-lock mechanism | Proc. of IEEE Int. Workshop on Safty, Security, and Rescue Robotics, (2004) | B |
| Y. Sugimoto*, K. Osuka | Walking Control of Quasi Passive Dynamic Walking Robot Quartet III based on Continuous Delayed Feedback Control | Proc. of IEEE International Conference on Robotics and Biomimetics (Robio2004), Shenyang, China, (2004) | B |
| R.Haraguchi*, K.Osuka, T.Sugie* | Development of Output Coupling Mechanisms Using the harmonic drive | IROS 2004, Sendai International Center, Sendai, Japan(2004) | B |
| K. Osuka, Y. Sugimoto* | Nonlinear Dynamics and Control of Walking Robot | Proc. 2004 International Symposium on Nonlinear Theory and its Applications, Fukuoka, Japan, (2004) | B |
| Y.Iwano, K.Osuka, H.Amano* | Proposal of a Rescue Robot System in Nuclear-Power Plants--Rescue Activity via Small Vehicle Robots-- | Proceedings of 2004 IEEE International Conference on Robotics and Biomimetics, Shenyang China, No.268, (2004) | B |
| Y.Iwano, K.Osuka, H.Amano* | Development of Stretcher Component Robots for Rescue Activity | Proceedings of 2004 IEEE Conference on Robotics, Automation and Mechatronics, Singapore, pp.915-920, (2004) | B |
| 杉本 靖博*, 大須賀 公一 | ポアンカレマップ内に存在するフィードバック構造に着目した受動的歩行の安定解析 | 第10回ロボティクス・シンポジア, pp.127-132, (2005) | A |
| 岩野 優樹, 大須賀 公一, 天野 久徳* | 原子力施設災害における救助活動用担架構成ロボットの開発 | 第10回ロボティクス・シンポジア予稿集, pp.441-446, (2005) | A |
| 原口 林太郎*, 大須賀 公一, 牧田 忍*, 田所 諭 | 瓦礫内探査ロボットMOIRA2 | 第10回ロボティクス・シンポジア予稿集, pp.423-428, (2005) | A |
| Takanori Fukao and Norihiko Adachi* | Observer-based Adaptive Control of Nonlinear Systems | 計測自動制御学会論文集, Vol.31, No.9, pp. 1351-1357 (1995) | A |
| T. Fukao, H. Kashima* and N. Adachi* | Robust Adaptive Control of Large-Scale Systems with Unmodeled Dynamic Interconnections | In Proc. of 2nd Asian Control Conference (2nd ASCC), pp. I-5 (1997) | B |
| 深尾 隆則, 稲山 典克*, 足立 紀彦* | 正則化理論を用いた連続的状態と行動を扱う強化学習 | システム制御情報学会論文誌, Vol.11, No.11, pp. 593-599 (1998) | A |
| T. Fukao, H. Nakagawa*, H. Wang* and N. Adachi* | Adaptive control of a nonholonomic mobile robot using adaptive backstepping | In Proc. of International Symposium on Intelligent Robotic Systems, (1998) | B |
| T. Fukao, T. Sumitomo*, N. Ineyama* and N. Adachi* | Q-learning Based on Regularization Theory to Treat the Continuous States and Actions | In Proc. of 1998 IEEE International Joint Conference on Neural Networks, pp. 1057-1062 (1998) | B |
| T. Fukao, H. Kashima* and N. Adachi* | Decentralized Adaptive Control of Dynamic Interconnected Systems with Improved Performance | In Proc. 8th IFAC Symposium on Large Scale Systems: Theory and Applications, pp. 138-143 (1998) | B |
| H. Wang*, T. Fukao and N. Adachi* | Adaptive tracking control of nonholonomic mobile robots: A backstepping approach | In Proc. of 1998 Japan-USA Symposium on Flexible Automation, pp. 1093-1096 (1998) | B |
| T. Fukao, A. Yamawaki* and N. Adachi* | Adaptive Control of Partially Known Systems Using Backstepping | In Proc. of 37th IEEE Conference on Decision and Control, pp. 481-486 (1998) | B |
| Takanori Fukao, Hisashi Kashima* and Norihiko Adachi* | Decentralized Adaptive Control with Improved Transient Performance | 計測自動制御学会論文集, Vol.35, No.7, pp. 869-878 (1999) | A |
| H. Wang*, T. Fukao, and N. Adachi* | An adaptive tracking control approach for nonholonomic mobile robot | In Proc. 1999 IFAC World Congress, pp. 509-515 (1999) | B |
| Takanori FUKAO, Masafumi YAMAGUCHI* and Norihiko ADACHI* | Backstepping Design For Attitude Control of a Spacecraft | In Proc. IASTED International Conference Robotics and Applications 1999, pp. 300-305 (1999) | B |
| Takanori FUKAO, Akira YAMAWAKI* and Norihiko ADACHI* | Nonlinear and H$_\infty$ Control of Active Suspension Systems with Hydraulic Actuators | In Proc. 38th IEEE Conference on Decision and Control, pp. 5125-5128 (1999) | B |
| Takanori Fukao, Hiroshi Nakagawa* and Norihiko Adachi* | Adaptive Tracking Control of a Nonholonomic Mobile Robot | IEEE Trans. Robotics and Automation, Vol.16, No.5, pp.609-615 (2000) | A |
| Takanori FUKAO, Akira YAMAWAKI* and Norihiko ADACHI* | Adaptive Control for Active Steering of Cars | In Proc. of Third Asian Control Conference (3rd ASCC), pp. 973-978 (2000) | B |
| 深尾 隆則, 山口 真史*, 足立 紀彦* | スペースクラフトのバックステッピング法による姿勢追従制御 | 日本機械学会論文集, C編 Vol.67, No.653, pp.131-137 (2001) | A |
| 王 輝宇*, 深尾 隆則, 足立 紀彦 | 非ホロノミック移動ロボットの適応トラッキング制御 | 日本ロボット学会誌, Vol.19, No.2, pp.123-128 (2001) | A |
| 深尾 隆則, 大村 亮祐*, 足立 紀彦* | Q-learning における状態空間の適応的分割法 | 計測自動制御学会論文集, Vol.37, No.3, pp.242-249 (2001) | A |
| 深尾 隆則, 足立 紀彦* | 倒立振子・台車系の部分的適応制御 | システム制御情報学会論文誌, Vol.14, No.5, pp.259-264 (2001) | A |
| 深尾 隆則, 山脇 明*, 足立 紀彦* | H∞制御と非線形適応制御機構を有するアクティブサスペンション | 計測自動制御学会論文集, Vol.37, No.11 pp. 1034-1039 (2001) | A |
| H. Wang*, S. Itani*, T. Fukao, and N. Adachi* | Image-based visual adaptive tracking control of nonholonomic mobile robot | IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1-6 (2001) | B |
| Takanori FUKAO, Shogo MIYASAKA*, Kenji MORI*, Norihiko ADACHI* and Koichi OSUKA | Active Steering Systems Based on Model Reference Adaptive Nonlinear Control | In Proc. of IEEE 4th International Conference on Intelligent Transportation Systems, pp. 504-509 (2001) | B |
| Takanori FUKAO, Kenji MORI*, Shogo MIYASAKA*, Norihiko ADACHI* and Koichi OSUKA | Automated Steering Systems Based on Model Reference Control | In Proc. of IEEE Intelligent Vehicles Symposium 2001, pp. 195-200 (2001) | B |
| Huiyu Wang*, Takanori Fukao and Norihiko Adachi* | Adaptive tracking control of nonholonomic systems with unknown parameters | Journal of Adavanced Robotics of the RSJ, Vol.16, No.2, pp.175-190 (2002) | A |
| Takanori Fukao, Akira Yamawaki* and Norihiko Adachi* | Adaptive Control of Partially Known Systems and Application to Active Suspensions | Asian Journal of Control, Vo.4, No.2, pp.199-205 (2002) | A |
| Takanori Fukao, Kazushi Fujitani* and Takeo Kanade* | An autonomous blimp for a surveillance system | In Proc. of 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2003), pp. 1820-1825 (2003) | B |
| Takanori Fukao, Kazushi Fujitani* and Takeo Kanade* | Image-based tracking control of a blimp | In Proc. 42nd IEEE Conference on Decision and Control, pp. 5414-5419 (2003) | B |
| Takanori Fukao, Shogo Miyasaka*, Kenji Mori*, Norihiko Adachi*, and Koichi Osuka | Active Steering Systems Based on Model Reference Adaptive Nonlinear Control | Vehicle System Dynamics, Vol.42, No.5, pp.301-318 (2004) | A |
| Takanori Fukao | Inverse Optimal Tracking Control of a Nonholonomic Mobile Robot | In Proc. of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2004), pp. 1475-1480 (2004) | B |
| 深尾 隆則, 足立 紀彦* | 適応制御に基づくスペースクラフトのランデブ・ドッキング | 日本機械学会論文集, C編 Vol.71, No.702, pp.573-580 (2005) | A |
| 梶井紳一郎*, 安田千秋*, 山下敏夫*, 安部浩*, 神吉博 | 振動増幅装置の同期制御手法の開発（実機とシミュレーションによる性能検証） | 日本機械学会論文集, 70巻(696号)C編, 1889-1896(2004) | A |
| Hiroshi Kanki, Yoshichika Sato, Takayuki Ueshima | Development of standard damper bearing for small and medium sized rotating machinery | Proc. IMech.E Rotor Dynamics Conference (2004) | B |
| Takuzo Iwatsubo*, Kazuhiko Adachi, Tomoaki Aoki*, Masahide Onuki*, and Hidetsugu Kakiuchi* | A study of the 2D dynamic simulation model for the golf swing | The Engineering of Sport 5, Volume 2 of 2, 389-395(2004) | B |
| Kazuhiko Adachi, and Kinya Sakota* | Model Based Damage Detection Method by using Time-reversal Processing | Proceedings of the 15th International Conference on Adaptive Structures and Technologies, CD-ROM(2004) | C |
| Kazuhiko Adachi, Yoshifumi Awakura*, and Takuzo Iwatsubo* | Hybrid Piezoelectric Damping for Structural Vibration Suppression | Journal of Intelligent Material Systems and Structures, 15(11), 795-801(2004) | A |
| Aneta Nicoleta Suciu*, Takuzo Iwatsubo*, Mitsumasa Matsuda, Takashi Nishino* | A Study upon Durability of the Artificial Knee Joint with PVA Hydrogel Cartilage | JSME International Journal, Series C, 47(1), 199-208(2004) | A |
| Aneta Nicoleta Suciu*, Takuzo Iwatsubo*, Mitsumasa Matsuda, Takashi Nishino* | Wear
Characteristics of a Novel Bearing System for Artificial Knee Joint
(Micro- Pocket-Covered Femoral Component and Tibial
Poro-Elastic-Hydrated Cartilage) | JSME International Journal, Series C, 47(1), 209-217(2004) | A |
| Michihiro Kawanishi, Masanori Ukibune | Unfalsified PID Controller Design for Active Magnetic Actuators Based on Direct Measured Data and L2 Gain Criterion | Proc. of the 9th International Symposium on Magnetic Bearings(2004) | B |
| Takuzo Iwatsubo*, Kazuhiko Adachi, Tomoaki Aoki*, Masahide Onuki*, and Hidetsugu Kakiuchi* | A study of the 2D dynamic simulation model for the golf swing | The Engineering of Sport 5, Volume 2 of 2, 389-395, 2004 | B |
| Kazuhiko Adachi, and Kinya Sakota* | Model Based Damage Detection Method by using Time-reversal Processing | Proceedings of the 15th International Conference on Adaptive Structures and Technologies, CD-ROM, 2004 | C |
| Kazuhiko Adachi, Yoshifumi Awakura*, and Takuzo Iwatsubo* | Hybrid Piezoelectric Damping for Structural Vibration Suppression | Journal of Intelligent Material Systems and Structures, 15(11), 795-801, 2004 | A |
| 東義隆*, 川野常夫*, 浜田隆史*, 岩木直*, 北川貴博*, 森脇俊道 | 携帯電話による会話と自動車運転の同時処理における意味的および空間的情報の干渉 | 日本機械学会論文集(C編), 70(693), 1341-1347(2004) | A |
| Toshimichi MORIWAKI, Young Chan SONG, Hirofumi SUZUKI | Ultra Precision Diamond Cutting of Plastic Materials by Applying Elliptical Vibration Cutting | Proceedings
of the 4th International Conference of the European Society for
Precision Engineering and Nanotechnology, 141-142(2004) | C |
| Hirofumi SUZUKI, Ryota KAWAMORI, Tadashi OKINO, Toshimichi MORIWAKI, Mitsuru MIYABARA*, Hideo SHIBUTANI* | Ultra Precision Finishing of Micro Aspherical Surface by Ultrasonic Assisting Polishing | Proceedings
of the 4th International Conference of the European Society for
Precision Engineering and Nanotechnology, 213-214(2004) | C |
| Keiichi SHIRASE, Keiichi NAKAMOTO, Eiji ARAI*, Toshimichi MORIWAKI | Digital Copy Milling - Autonomous Milling Process Control without NC Program - | Proceedings of the 14th International Conference on Flexible Automation & Intelligent Manufacturing, 1145-1152(2004) | C |
| Toshimichi MORIWAKI, Keiichi SHIRASE | Intelligent Machine Tools - Current Status and Future Direction - | Proceedings of the 14th International Conference on Flexible Automation & Intelligent Manufacturing, 10-17(2004) | C |
| Keiichi SHIRASE, Keiichi NAKAMOTO, Eiji ARAI*, Toshimichi MORIWAKI | Digital Copy Milling to Achieve Real-time Five-axis Milling Control | Proceedings of the 3rd International Conference and Exhibition on Design and Production of Dies and Molds, 45-49(2004) | C |
| Keiichi NAKAMOTO, Keiichi SHIRASE, Hidefumi WAKAMATSU*, Akira TSUMAYA*, Eiji ARAI* | NC Program-less Direct Machining to Realize Autonomous Machine Tool | Proceedings of the 2004 JAPAN-U.S.A. Symposium on Flexible Automation, CD-ROM JL027(2004) | B |
| Toshimichi MORIWAKI, Eiji Shamoto*, Young Chan SONG, Seido KOHDA* | Development of Elliptical Vibration Milling Machine | Annals of the CIRP, 53(1), 341-344(2004) | A |
| Toshimichi MORIWAKI, Toshiro SHIBASAKA, Somkiat TANGJITSITCAROEN | Development of In-Process Tool Wear Monitoring System for CNC Turning | JSME International Journal Series C, 47(3), 933-938(2004) | A |
| 千田治光*, 佐藤礼士*, 森脇俊道 | 量産を目的とした工作機械の主軸熱変位推定－(第1報)主軸温度と主軸熱変位の関係－ | 日本機械学会論文集(C編), 70(698), 2961-2965(2004) | A |
| 白瀬敬一, 中本圭一, 荒井栄司*, 森脇俊道 | NCプログラムを必要としない自律型工作機械－工程設計および作業設計の自動化によるダイレクトマシニング－ | 精密工学会誌, 70(11), 1449-1454(2004) | A |
| Yoshitaka AZUMA*, Tsuneo KAWANO*, Toshimichi MORIWAKI | Evaluation
Method for Driving Performance Using a Driving Simulator under the
Condition of Drunk Driving or Talking Driving with a Cell Phone | Proceedings of the 5th International Conference on Machine Automation, 273-278(2004) | C |
| Chunxiang MA*, Eiji SHAMOTO*, Toshimichi MORIWAKI, Lijiang WANG* | Study of Machining Accuracy in Ultrasonic Elliptical Vibration Cutting | International Journal of Machine Tool & Manufacture, 44, 1305-1310(2004) | A |
| Yuji Yamamoto, Hirofumi SUZUKI, Tadashi OKINO, Yoshio HIJIKATA, Toshimichi MORIWAKI | Ultra
Precision Grinding of Micro Aspherical Surface - Development of a
Three-Axes Controlled Single Point Inclined Grinding Method - | Proceedings of the American Society for Precision Engineering, 558-561(2004) | C |
| Chunxiang MA*, Eiji SHAMOTO*, Toshimichi MORIWAKI | Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration Cutting | Materials Science Forum, 471-472, 396-400(2004) | C |
| H. Narita*, K. Shirase, E. Arai*, K. Namamoto, L. Y. Chen*, H. Fujimoto* | Proposal of a Concept of Future Oriented Machine Tools for Advanced Manufacturing System | International Journal of Production Research, 42(17), 3657-3673 (2004) | A |
| 白瀬敬一, 中本圭一, 荒井栄司*, 森脇俊道 | NCプログラムを必要としない自律型工作機械 −工程設計および作業設計の自動化によるダイレクトマシニング− | 精密工学会論文集, 70(11), 1449-1454 (2004) | A |
| J. B. M. Goossenaerts*, E. Arai*, K. Shirase, J. Mills*, F. Kimura* | Enhancing Knowledge and Skill Chains in Manufacturing and Engineering | Knowledge
and Skill Chains in Engineering and Manufacturing -Information
Infrastructure in the Era of Global Communications-, Published by
Springer, 1-10 (2004) | A |
| J. Yagi*, E. Arai*, K Shirase | Logics of Becoming in Scheduling : Logical Movement behind Temporality | Knowledge
and Skill Chains in Engineering and Manufacturing -Information
Infrastructure in the Era of Global Communications-, Published by
Springer, 111-118 (2004) | A |
| H. Narita*, L. Y. Chen*, H. Fujimoto*, K. Shirase, E. Arai* | Proposal
of Modification Strategy of NC Program in the Virtual Manufacturing
Environment -Information Infrastructure in the Era of Global
Communications- | Knowledge and Skill Chains in Engineering and Manufacturing, Published by Springer, 277-284 (2004) | A |
| K. Shirase, S. Honjou*, H. Wakamatsu*, A. Tsumaya*, E. Arai* | Dynamic Co-operative Scheduling Based on HLA | Knowledge
and Skill Chains in Engineering and Manufacturing -Information
Infrastructure in the Era of Global Communications-, Published by
Springer, 285-292 (2004) | A |
| T. Moriwaki, K. Shirase | Intelligent Machine Tools - Current Status and Future Direction - | Proceedings
of the 14th International Conference on Flexible Automation and
Intelligent Manufacturing, 10-17 (2004), [Keynote Paper] | B |
| K. Shirase, K. Nakamoto, E. Arai*, T Moriwaki | Digital Copy Milling - Autonomous Milling Process Control without NC Program - | Proceedings of the 14th International Conference on Flexible Automation and Intelligent Manufacturing, 1145-1152 (2004) | B |
| K. Nakamoto, K. Shirase, H. Wakamatsu*, A. Tsumaya*, E. Arai* | NC Programm-less Direct Machining to Realize Autonomous Machine Tool | Proceedings of the 2004 JAPAN-USA Symposium on Flexible Automation, JL027, CD-ROM (2004) | B |
| H. Watanabe*, A. Tsumaya*, H. Wakamatsu*, K. Shirase, E. Arai* | Dynamic Scheduling System with Variable Lot Size Approach Using Parts and Packets | Proceedings of the 2004 JAPAN-USA Symposium on Flexible Automation, JS038, CD-ROM (2004) | B |
| K. Takeuchi*, A. Tsumaya*, H. Wakamatsu*, K. Shirase, E. Arai* | Extensibility for Integrated Model of Geometrical and International Information | Proceedings of the 2004 JAPAN-USA Symposium on Flexible Automation, JL013, CD-ROM (2004) | B |
| G. Han*, H. Wakamatsu*, A. Tsumaya*, E. Arai*, K. Shirase | Flexible Process Planning System Considering Design Intentions | Proceedings of the 5th International Conference on Machine Automation, 137-142 (2004) | C |
| 谷水義隆*, 阪口龍彦, 杉村延広* | 遺伝的アルゴリズムを用いたリアクティブスケジューリング (第1報，作業の遅延に対する生産スケジュールの変更) | 日本機械学会論文集C編, 69(685), 234-239 (2003) | A |
| Y. Tanimizu*, T. Sakaguchi, K. Harada*, N. Sugimura* | Genetic algorithm based reactive scheduling in multi-layered manufacturing system | Proc. of 2002 Japan - USA symposium on flexible automation, 2, 951-958 (2002) | B |
| Y. Tanimizu*, T. Sakaguchi, N. Sugimura* | Reactive scheduling for unscheduled changes in manufacturing systems | Current trends in production management, European series in industrial management, 6, 80-86 (2003) | B |
| Y. Tanimizu*, T. Sakaguchi, N. Sugimura* | Genetic algorithm based reactive scheduling for emergent jobs | Proc. of 2004 Japan - USA symposium on flexible automation, CD-ROM (2004) | B |
| Y. Tanimizu*, T. Sakaguchi, N. Sugimura* | Reactive scheduling system for unforeseen delays of manufacturing processes | Proc. of 7th international pacific conference on manufacturing & management, 2, 714-719 (2002) | C |
| T. Sakaguchi, Y. Tanimizu*, N. Sugimura* | Genetic algorithm based reactive scheduling for emergent jobs | Proc. of the 2nd international conference on leading edge manufacturing in 21st century, 725-728 (2003) | C |
| Y. Tanimizu*, T. Sakaguchi, N. Sugimura*, K. Iwamura* | A study on reactive scheduling system based on genetic algorithm | Proc. of 5th international workshop on emergent synthesis, 85-89 (2004) | C |
| T. Sakaguchi, Y. Tanimizu*, K. Harada*, K. Iwamura*, N. Sugimura* | Genetic
algorithm based reactive scheduling in manufacturing systems - Advanced
crossover method for tardiness minimization problems - | Proc. of international conference on machine automation, 347-352 (2004) | C |
| 田浦俊春, 飛田州亮 | 設計空間の形成メカニズムに関する研究—空間写像の前後における距離の保存則の役割— | デザイン学研究, Vol.51, No.4, 29-34 (2004) | A |
| 田浦俊春, 中山嘉人 | 評価関数による抽象的形状特徴の表現方法に関する研究—進化的計算手法による形状生成のための評価関数の獲得— | デザイン学研究, Vol.51, No.4, 35-44 (2004) | A |
| A.Lengyel, K.Ueda and T.Taura | Multi-objective optimization in job shop manufacturing systems based on Emergent | Proceedings of the 37th CIRP international Seminar on Manufacturing, Budapest, Hungary, 205-212 (2004) | B |
| Min. An and Toshiharu. Taura | Interactive Behavioral Design between Autonomous Behavioral Criteria Learning System and Human | Proceedings of The 5th International Conference on Machine Automation, (ICMA), 261-266(2004) | B |
| 片田喜章, 大倉和博, 上田完次* | Neutral Networksを含む適応度景観における遺伝的アルゴリズムの進化ダイナミクス | システム制御情報学会論文誌 Vol.17, No.5, 187-195(2004) | A |
| Yoshiaki Katada, Kazuhiro Ohkura and Kanji Ueda* | The Nei's Standard Genetic Distance in Artificial Evolution | Proceedings of The 2004 Congress on Evolutionary Computation(CEC2004), 1233-1239(2004) | B |
| Ming Chang, Kazuhiro Ohkura and Kanji Ueda*, Masaharu Sugiyama* | Modeling Coevolutionary Genetic Algorithms on Two-Bit Landscapes: Partnering Strategies | Proceedings of The 2004 Congress on Evolutionary Computation(CEC2004), 2349-2356(2004) | B |
| Yoshiaki Katada, Kazuhiro Ohkura and Kanji Ueda* | An Approach to Evolutionary Robotics Using a Genetic Algorithm with a Variable Mutation Rate Strategy | Proceedings of The 8th Parallel Problem Solving from Nature (PPSN VIII), 952-961(2004) | B |
| Toshiyuki Yasuda, Kazuhiro Ohkura and Toshiharu Taura | Autonomous Role Assignment in Homogeneous Multi-Robot Systems | Proceedings of The 4th International Conference on the Advanced Mechatronics (ICAM'04), 589-594(2004) | B |
| Kazuhiro Ohkura and Ryota Washizaki | Robust Instance-Based Reinforcement Learning for Multi-Robot Systems | Proceedings of The 4th International Conference on the Advanced Mechatronics (ICAM'04), 583-588(2004) | B |
| Kazuhiro Ohkura and Kanji Ueda* | AUTONOMOUS SPECIALIZATION: AN APPROACH TO DYNAMIC ROLE ALLOCATION FOR A MULTI-ROBOT SYSTEM | Proceedings of The 5th International Workshop on Emergent Synthesis(IWES'04), 133-138(2004) | C |
| Yoshiaki Katada, Kazuhiro Ohkura and Kanji Ueda* | An Approach to Evolutionary Robotics Problems from The Genetic Algorithm with the Variable Mutation Rate Strategy | Proceedings of the 5th International Workshop on Emergent Synthesis(IWES'04), 117-124(2004) | C |
| Toshiyuki Yasuda, Kazuhiro Ohkura and Kanji Ueda* | A HOMEGENEOUS MOBILE ROBOT TEAM THAT IS FAULT-TOLERANT | Proceedings of The 5th International Workshop on Emergent Synthesis(IWES'04), 139-146(2004) | C |
| Toshiyuki Yasuda, Kazuhiro Ohkura and Toshiharu Taura | On the Performance of Reinforcement Learning for a Multi-Robot Team | Proceedings of The Fourth International Symposium on Human and Artificial Intelligence Systems (HART'04), 354-358(2004) | C |